Our Products

Advanced lifting equipment for safer load control, better positioning and more predictable site operations.

Vita Load Navigator

Precision Load Control. Without Manual Handling.

Remote-controlled load orientation system designed to reduce risk, improve control and support complex lifting operations.

Explore the Vita Load Navigator

LIFTING BEAMS

Self-Balancing Lifting Beams

Automatically levels unbalanced loads via remote control, reducing manual intervention and improving lift accuracy.

View Beam Systems

Lifting Systems

Vacuum Lifting Systems

High-capacity vacuum units for the safe handling of panels, glass, façades and modular components.

Explore Vacuum Units

Cantilever

Restricted-Access Lifting Solutions

Cantilever and offset lifting beams designed for confined spaces and challenging site conditions.

View Specialist Beams

Vita Load Navigator

Remote-controlled load-orientation system for controlled and precision lifting.

Spreader Beam Adjustable 2 Point

This adjustable two point spreader beam is designed for lifts where controlled load distribution across two points is needed. It suits longer or larger loads where balance and stability matter.

H Frame Beam

H frame beams are built for heavier lifting work where stable load distribution is essential. They are available across a range of capacities to suit demanding lifting requirements.

Framework Beam

Framework beams are used when a lift needs a larger footprint and broader support across the load. They are well-suited to wider lifting arrangements and loads that need greater overall stability.

Adjustable Centre Eye Beam

An adjustable centre eye beam is used where a central lifting connection is needed while still allowing the beam length and lifting setup to suit the job. It helps support balanced and controlled lifting across a range of load types.

2 Leg with Extendable Load Points Beam

This beam is designed for lifting operations where the load points need to be adjusted to suit different load sizes and configurations. It gives teams more flexibility when handling longer or more varied loads.

Adjustable 2 Leg Beam

An adjustable 2 leg beam gives more flexibility when lift dimensions and load requirements vary from one job to the next. It is designed for projects where one fixed beam would not suit every lift.

Spreader Beam

Spreader beams are used to improve stability and reduce stress on slings by creating two lifting points. They are especially useful for longer or wider loads that need better load distribution.

Lifting Beams

Lifting beams are used when a load needs more support, better balance or a more controlled lift than standard rigging can provide. MDM offers a wide range of beam options to suit different load types, lifting points and site conditions.

I‑Boom 50

I‑Boom 50 is the largest I‑Boom counterbalance beam in the range and is currently under development. It is intended for future high-capacity projects where very heavy elements need to be inserted and positioned with precision.

I‑Boom 20

I‑Boom 20 is a high-capacity I‑Boom counterbalance beam for large lifting operations. It supports deep insertion and controlled placement of heavier elements, particularly on more complex or higher‑reach construction projects.

I‑Boom 12

I‑Boom 12 is an I‑Boom counterbalance beam for projects that require significant insertion depth and fine control. It is used on larger construction jobs where precise positioning of heavy elements is essential.

I‑Boom 10

I‑Boom 10 is a mid‑range I‑Boom counterbalance beam for lifting tasks that require greater insertion depth and capacity. It is suited to projects where heavier elements must be positioned accurately in more complex access conditions.

I‑Boom 6

I‑Boom 6 is a radio-controlled counterbalance beam used in residential, prefab and general construction projects where loads need to be placed precisely beneath overhangs or within façade lines. Its controlled counterweight system helps maintain level lifting and positioning.

I‑Boom 3

I‑Boom 3 is a radio-controlled counterbalance beam for smaller loads and tighter working areas. It keeps the beam level in loaded and unloaded positions, helping operators place loads more accurately through limited openings.

Maxi‑Steker 2

Maxi‑Steker 2 is a high capacity counterbalance beam for projects that need deeper insertion and higher working loads. It is designed to balance self‑weight, transportability and performance for complex and heavy lifting work.

Maxi‑Steker

Maxi‑Steker is a robust counterbalance beam for demanding lifting environments. It is suited to projects where larger elements need to be inserted at depth while maintaining stable, controlled handling on busy construction sites.

Combi‑Steker

Combi‑Steker is a versatile counterbalance beam designed for heavier loads and deeper insertion depths. It is used where loads must be inserted directly within the façade line or beneath obstructions, while maintaining stable and controlled placement.

Op‑Steker

Op‑Steker is a compact counterbalance beam designed for lifting operations where lighter loads need to be inserted within the façade line or beneath smaller overhangs. It is suited to restricted-access work where the standard crane hook reach is insufficient.

CladBoy

CladBoy is a modular vacuum lifting system designed for installing sandwich roof and wall panels safely and efficiently. It can be configured for long or short panels, horizontal and vertical installation, and different roof and façade arrangements, helping reduce manual handling and surface damage.

Power Grip MRT

Power Grip MRT is a flexible vacuum lifting system designed for handling glass, façade panels and other smooth‑faced materials. It is well suited to façade, glazing and panel installation where controlled, damage‑free lifting is required.

Yellow Power

Yellow Power is a high‑capacity vacuum lifting unit for large and heavy elements such as precast concrete, façade sections and other dense building components. It is built for demanding lifting environments where high working loads and reliable vacuum performance are both essential.

VacuStone GA

VacuStone GA is a compact vacuum lifting unit designed for handling smaller to medium‑sized concrete elements and panels. It provides a practical solution where clamps or chains would be slower, less precise or more likely to damage the surface.

C-Hooks

C‑Hooks are purpose‑built lifting devices designed for under‑lift hoisting of elements in locations with roof overhangs, balconies, bridge decks and similar obstructions. Their open‑frame geometry allows loads to be positioned beneath overhangs and into restricted areas that standard lifting gear cannot reach.

Pallet Hook for Plasterboard

The Pallet Hook for Plasterboard is a specialist pallet hook designed specifically for handling plasterboard packs and related long, flat materials. It allows full plasterboard packs to be lifted and, where required, tilted from horizontal to vertical for safer preparation and installation.

Pallet Hook

The Pallet Hook is a heavy‑duty lifting device for safely handling palletised materials with an overhead crane. It is designed to make pallet lifting on construction and industrial sites safer, more efficient and less reliant on forklifts alone.

Check A Flag®

Check A Flag is a visual communication system designed to improve coordination and safety during lifting operations. Also known as “Flag In A Bag”, it gives crane teams a simple, highly visible way to communicate key lift status and instructions on site.

Orientator 1000

Orientator 1000 is a high‑capacity load‑orientation unit designed for aligning heavy elements up to 20,000 kg. It is suspended from the crane hook and uses radio‑controlled fans to actively adjust the hook and load orientation during lifting.

Orientator 800

Orientator 800 is a powerful load‑orientation unit designed for rotating and aligning heavier elements up to around 10,000 kg. Suspended from the crane, it uses radio‑controlled fans to keep the load under control during lifting and positioning.

Orientator 600

Orientator 600 is a compact load‑orientation unit designed for preventing spinning and improving control on smaller to medium‑sized lifts. It is ideal when wind or tight access makes manual taglines less effective or less safe.

4D Balancer

The 4D Balancer is a four‑leg balancing system designed to precisely straighten, tilt and rotate complex loads in multiple directions. It uses remote‑controlled hydraulic adjustment of all chain lengths, keeping chains tensioned and the load stable during movement.

2D Balancer

The 2D Balancer is designed to bring the load’s centre of gravity directly beneath the crane hook and to straighten or tilt elements in one plane. It adjusts chain lengths by remote control, allowing operators to correct and level loads from a safe distance.

Specialised Solutions

Custom combinations of beams, balancers, orientators and vacuum units designed around specific lifting challenges, site constraints and load requirements.

Our Products

Vita Load Navigator

Precision Load Control. Without Manual Handling.

LIFTING BEAMS

Self-Balancing Lifting Beams

Lifting Systems

Vacuum Lifting Systems

Cantilever

Restricted-Access Lifting Solutions

Let’s Talk About Your Lifting Requirements